Boxpro ExpressHaul & Handyman
CALL (530) 978-8081

Yuba City & Marysville

Wide-Aspect Panoramic Facade

The Sutter Executive 15x8

Model #5: Premium 15' W x 8' D Custom Western Red Cedar Craftsman Monoslope Studio

Shed BuildingAll ModelsThe Sutter Executive 15x8
Model #5 Executive Suite
360° Video Walkthrough
Interactive 360° & Video Inspector1 / 8
Model #5100% Cedar Build

15-Foot Panoramic Glass Facade Architecture

Featuring a wide 15-foot front elevation with a centered 36-inch glass door, symmetrical floor-to-ceiling picture windows, and 3 equal-sized clerestory transom windows for maximum executive workplace lighting.

“Engineered with a straight single-slope shed roof tapering from 9.5ft in the front to 7.5ft in the rear, combining modern craftsman luxury with zero-permit 120 sq ft compliance.”

Footprint & Area
15' W x 8' D (120 Sq Ft)
Height Profile
9.5' High Front Tapering Rear
Entry Doorway
36" Centered Full-Glass Door
Foundation Type
12-Point Concrete Pier Pads
Built On-Site in 1–2 Days
Zero Travel Surcharge across Yuba-Sutter

Technical Specifications — Model #5

Footprint Aspect
15' W x 8' D (Panoramic Front Elevation)
Framing
2x4 SPF Studs at 16" On-Center
Floor Joists
2x6 PT Joists at 12" O.C. w/ 3/4" T&G Subfloor
Siding
Stained Western Red Cedar Vertical Board & Batten
Roofing Profile
Straight Monoslope Roof (9.5' Front Peak Tapering to 7.5' Rear)
Heat Defense
105°F Double Thermal Radiant Barrier + Vent Ridge
Permit Status
100% Zero Permit Required (120 Sq Ft)

360° Interactive Architectural Video Reel

Model #5: The Sutter Executive 15x8 Craftsman Studio

Shed Building

Precision Architectural CAD Blueprints

Architectural CAD Blueprint Visualizations

Explore the exact structural framing diagrams, pier foundation matrix, and roof transom elevation plans custom-crafted for The Sutter Executive 15x8 workspace.

The Sutter Executive CAD Foundation Blueprint
Plan 01 — Foundation Matrix

Concrete Pier Base & Subfloor Matrix

12-Point heavy-duty concrete pier pad layout designed to distribute 15-foot wide floor loads evenly, preventing soil sag and guaranteeing a level deck.

2x6 PT Joists @ 12" O.C.3/4" T&G Flooring
The Sutter Executive CAD Framing Blueprint
Plan 02 — Wall & Header Framing

15-Foot Wide Wall Framing & Monoslope Rafters

Kiln-dried 2x4 stud wall framing at 16" on-center with centered door lintel header, double top plates, and 9.5ft single-slope roof rafters.

16" On-Center FramingCentered Door Header
The Sutter Executive CAD Roofing Blueprint
Plan 03 — Straight Monoslope Roof & Transoms

Straight Single-Slope Metal Roof & Transoms

Single-slope standing seam corrugated metal roof system with 3 equal-sized glass transom windows for continuous ambient daylight.

Standing Seam Steel3 Equal Transoms
The Sutter Executive CAD Exterior Blueprint
Plan 04 — Exterior Elevation

Western Red Cedar Siding & Centered Glass Door

Stained Western Red Cedar vertical board & batten siding with white fascia trim, centered glass door, and symmetrical side picture windows.

Western Red CedarSymmetrical Windows

Sutter Executive Pricing & Finish Tiers

Choose the build package tailored to your executive workspace requirements.

Tier 1

Heavy-Duty Frame & Shell

$5,950

Complete 15x8 exterior weatherproof shell assembled on-site with centered glass door frame and 3 top transoms.

100% Western Red Cedar Siding
3 Equal-Sized Top Transom Windows
Concrete Pier Base Matrix
Call (530) 978-8081
Tier 2

Sealed Executive Studio

$7,450

Adds climate protection, double-pane picture windows, and electrical rough-in conduit.

All Tier 1 Frame Features
Double-Pane Low-E Picture Windows
Electrical Rough-In Conduit
Call (530) 978-8081
Recommended Executive Suite
Tier 3

Full Turnkey Finished Suite

$9,650

Turnkey climate-controlled executive workspace completed in 48 hours. Insulated, drywall finished, with solid oak floors and recessed lighting.

Full Cavity R-13 Thermal Insulation
Drywall & Interior Baseboard Trim
Solid Oak Hardwood Flooring
Order Turnkey Executive Suite
Official Yuba City & California Building Code Compliance

100% Permit-Exempt Backyard Architecture

Every Boxpro Express shed model is custom designed and precision built to satisfy exact California Residential Code (CRC R105.2) and City of Yuba City Development Code guidelines for zero-permit residential installation.

California Residential Code (CRC Section R105.2.1) & Yuba City Municipal Code

120 Sq Ft Maximum Floor Area Limit

One-story detached accessory structures used as storage sheds, tool sheds, or home studios do NOT require a building permit provided the floor area does not exceed 120 square feet.

100% Compliant across all 4 Boxpro 10'x12' & 8'x12' Models
CRC Section R105.2 & City of Yuba City Development Code

Under 12-Foot Peak Height Limitation

Permit-exempt residential accessory structures must remain 1-story with an overall height profile under 12 feet from finished grade to peak.

Compliant (Tapered Monoslope 10', Craftsman Gable 10', Gambrel Barn 11' 6")
Sutter County & Yuba City Building Division Standards

Pier Pad Foundation (No Permanent Concrete Slab Permit)

Structures built on high-density concrete pier pad matrices are classified as non-permanent elevated wood frame foundations, avoiding deep foundation excavation permits.

Standard Base Pad Matrix Included on Every Build
Yuba City Zoning Ordinance Section 8.20.040

Property Line Setback & Fire Safety

Allows installation in side and rear yards provided a minimum 3-foot clearance is maintained from side/rear property lines. Real Western Red Cedar siding provides natural fire and rot defense.

Pre-installation Site Assessment Included for Every Home
California Business & Professions Code (B&PC § 7048 / AB 2622)

Retail Manufactured Product & CSLB Minor Assembly Compliance

Boxpro Express operates as a manufacturer of modular timber shed structures sold as retail product units. On-site assembly labor performed under minor handyman limits is strictly capped under statutory California limits ($1,000 assembly allowance).

100% Compliant CSLB Business & Retail Structure

Hassle-Free Backyard On-Site Delivery & Assembly

No city plan submissions, zero architectural filing fees, and no waiting months for municipal approvals. Modular panels manufactured in-shop and delivered to your property across Yuba City, Marysville, Sutter, Plumas Lake, and Olivehurst.

California CSLB Notice (B&PC § 7048 / § 7027.1): Boxpro Express LLC sells manufactured timber shed kit units as retail product sales. On-site assembly labor under handyman services is capped under statutory minor work limits ($1,000 max labor allowance per CA AB 2622) or assembled via CSLB licensed contractor partners.
Call (530) 978-8081 For Quote & Setup
Yuba-Sutter Local Shed Building Network

Custom Western Red Cedar Shed Builders Across Yuba, Sutter & Butte Counties

Boxpro Express provides local on-site custom shed construction with zero travel surcharges. Select your city and preferred model below to view local building codes, foundation specs, and architectural CAD blueprints.

Complete 32 Local Service Area & Shed Model Matrix

Handyman & Repairs

Need custom interior electrical, drywall finishing, or subfloor repair? Explore our handyman services.

Shed & Property Cleanout

Have an old dilapidated wooden shed or junk taking up backyard space? We haul it away before your new build.

Decks & Landscaping

Pair your new Western Red Cedar shed with custom timber decking, paver pathways, or tree stump grinding.

Ready to Get Started?

Contact us today for a free, no-obligation quote. We're ready to help with your next project!